Sony DVS-9000 User Manual page 120
Production switcher system
Hide thumbs
Also See for DVS-9000:
- User manual (1228 pages) ,
- Installation manual (42 pages) ,
- Operation manual (24 pages)
Table of Contents
Advertisement
Knob
Parameter
2
Latitude
a) Minus moves counterclockwise, plus moves clockwise.
When you selected Point
Knob
Parameter
1
X
2
Y
3
Z
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Minus moves forward, plus moves deeper.
When you selected Line
Knob
Parameter
1
X
2
Y
3
Z
4
Longitude
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Minus moves forward, plus moves deeper.
d) Minus moves counterclockwise, plus moves clockwise.
6
In the <Axis Select> group, select the coordinate space in which to place
the light source.
Source: Place the light source in the source coordinate space. The
spotlight moves when the image moves.
Target: Place the light source in the target coordinate space. The spotlight
does not move, even when the image moves.
For details of the coordinate space in which to place the light source, see
"DME Special Effects" in Chapter 1 (Volume 1).
To set a test sphere
1
In the Light 1 menu, press [Test Sphere], turning it on.
A test sphere effect appears on the surface of the image.
2
Adjust the following parameter.
Adjustment
Latitude
Adjustment
Movement in X-axis direction
Movement in Y-axis direction
Movement in Z-axis direction
Adjustment
Movement in X-axis direction
Movement in Y-axis direction
Movement in Z-axis direction
Longitude
Setting values
–8.00 to +8.00
Setting values
a)
–6.00 to +6.00
b)
–6.00 to +6.00
c)
–6.00 to +6.00
Setting values
a)
–6.00 to +6.00
b)
–6.00 to +6.00
c)
–6.00 to +6.00
d)
–8.00 to +8.00
DME Special Effect Operations
119
Advertisement
Table of Contents
