Setup Relating to DME
Note
To use DME requires the BKDS-9470 DME Board Set.
Settings Relating to Signal Inputs (Input Menu)
To make settings relating to DME input signals, display the DME>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF4 'DME' and HF1 'Input.'
The status area shows the input signal numbers and names, together with initial
crop information.
Setting the initial crop
Use the following procedure.
1
In the <Aspect> group of the DME>Input menu, select the screen aspect
ratio (16:9 or 4:3).
2
Press [Initial Crop], and adjust the following parameters.
• If you selected 4:3 in step 2
Knob
1
2
3
4
• If you selected 16:9 in step 2
Knob
1
2
3
4
Parameter
Adjustment
Top
Position of top side
Left
Position of left side
Right
Position of right side
Bottom
Position of bottom side
Parameter
Adjustment
Top
Position of top side
Left
Position of left side
Right
Position of right side
Bottom
Position of bottom side
Setting values
–3.00 to +3.00
–4.00 to +4.00
–4.00 to +4.00
–3.00 to +3.00
Setting values
–9.00 to +9.00
–16.00 to
+16.00
–16.00 to
+16.00
–9.00 to +9.00
123
Setup Relating to DME