Sony DVS-9000 User Manual page 294

Production switcher system

Hide thumbs Also See for DVS-9000:

Table of Contents

Press [Install].

The "Install" box shows "On," confirming that this is to be installed. To

cancel this installation setting, press "Install" once more, making the box

To carry out the installation, press [Execute].

A confirmation message appears.

Select [Yes].

This carries out the installation, and when it completes normally, the

"Install" box shows "OK."

Switching the color correction function

After making the setting, be sure to finally press [Execute] to confirm the

setting. To cancel the setting during the process, press [Clear].

In the System >Install/Unit Config menu status area, select SWR1 or

SWR2, where the color correction function is installed.

Press [Unit Config].

• The Unit Config menu appears.

• The status area shows the device name and the currently selected color

correction function name.

In the <CCR Config> group, select either of the following.

Spot CCR: Enable the spot color adjustment function.

Secondary CCR: Enable the secondary color correction function.

Press [Execute].

A confirmation message appears.

Select [Yes].

• This resets the device and switches the function.

• The color correction settings are all reinitialized.

Setup for the Whole System