Knob
1
2
3
Setting the bar mode of the highlight area
When you select [Bar] in step 3 of "Applying the Lighting effect" (see page
99), use the following procedure to set the bar mode of the highlight area.
For a sample illustration and other information, see "Digital Multi Effects
(DME)" in Chapter 1 (Volume 1).
Note
The bar mode of the highlight area is not supported on the MVE-8000A.
1
Select the mode in the <Bar Light Mode> group.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively
reflective surface.
2
Set the following parameters.
Knob
1
2
3
4
3
When you select Normal or Mat in step 1, press [Bar Diffuse Color],
turning it on, and adjust the following parameters to set the color of the
diffuse light area.
Knob
1
2
3
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Parameter
Adjustment
Intensity
Intensity of diffuse light area
Offset
Offset of center of diffuse light
area
Width
Width of diffuse light area
Soft
Softness of diffuse light area
Parameter
Adjustment
Luminance
Luminance
Saturation
Saturation
Hue
Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
–4.00 to +4.00
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
103