Suzuki SQ416 Service Manual page 98
Hide thumbs
Also See for SQ416:
- Service manual (118 pages) ,
- Owner's manual (266 pages) ,
- Service manual (731 pages)
Table of Contents
Advertisement
7E-2 DIFFERENTIAL (FRONT)
1. Rear mounting bracket bolt and nut
2. Differential carrier
3. Cross member
4. Rear mounting bracket bolt
5. Differential rear mounting assembly
1. Rear mounting bolt
2. Rear mounting bracket bolt
3. Rear mounting bracket
ON-VEHICLE SERVICE
REMOVAL AND INSTALLATION
Differential Mountings
REAR MOUNTING
(For front differential carrier)
Solid Type
1) Lift up vehicle and remove mounting assembly by removing 2
bolts and nuts from differential carrier side and 2 bolts from cross
member side.
2) Check mounting rubber for damage or deterioration and replace
as necessary.
3) Use following torque for reinstallation.
Tightening Torque
.
(a): 50 N
m (5.0 kg-m, 36.5 lb-ft)
Bush Type
1) Lift up vehicle and remove rear mounting bracket by removing
rear mounting bolt and rear mounting bracket bolts.
2) Check mounting rubber for damage or deterioration and replace
as necessary.
3) Tighten rear mounting bolts and rear mounting bracket bolts to
specified torque for reinstallation.
Tightening torque
Rear mounting bolt (a):
.
85 N
m (8.5 kg-m, 61.5 lb-ft)
Rear mounting bracket bolts (b):
.
50 N
m (5.0 kg-m, 36.5 lb-ft)
Hide quick links:
Advertisement
Chapters
Table of Contents
