Cruise Control Actuator Assembly; (With Control Module) - Suzuki SQ416 Service Manual
Hide thumbs
Also See for SQ416:
- Service manual (118 pages) ,
- Owner's manual (266 pages) ,
- Service manual (731 pages)
Table of Contents
Advertisement
CRUISE CONTROL ACTUATOR ASSEMBLY
(WITH CONTROL MODULE)
CAUTION:
Never disassemble cruise control actuator assembly.
Disassembly will spoil its original function.
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Disconnect connector from actuator assembly (2) (with control
module).
3) Remove actuator cap (1) from actuator assembly (2).
4) Disconnect cruise cable (3) from actuator assembly (2).
5) Remove actuator assembly (2) from vehicle.
INSPECTION
Move actuator lever (1) by hand and check its operation as de-
scribed below.
1) Actuator lever (1) should not turn clockwise.
2) Actuator lever (1) should turn smoothly by about 1/3 rotation
counterclockwise and contact internal stopper.
3) When hand is taken off from actuator lever (1) at the position in
2) above, it should return to its original position (2) by return
spring force. If actuator lever (1) does not operate as described
above, replace it.
INSTALLATION
Install actuator assembly by reversing removal procedure, noting
the following point.
D Adjust cruise cable play to specification referring to "CRUISE
CABLE PLAY INSPECTION AND ADJUSTMENT" in this section.
CRUISE CONTROL SYSTEM 8E-23
Hide quick links:
Advertisement
Chapters
Table of Contents
