Suzuki SQ416 Service Manual page 14
Hide thumbs
Also See for SQ416:
- Service manual (118 pages) ,
- Owner's manual (266 pages) ,
- Service manual (731 pages)
Table of Contents
Advertisement
3E-6 REAR SUSPENSION
"A"
1. Axle housing
(f)
14) Clean mating surface of axle housing (right & left) and brake
back plate, then apply sealant as shown.
"A": Sealant 99000-31110
15) Apply grease to axle shaft inner oil seal lip as shown.
"A": Grease 99000-25010
1. Axle housing
16) Apply sealant to mating surface of bearing retainer with brake
back plate.
NOTE:
Make sure to remove old sealant before applying it anew.
"B": Sealant 99000-31110
1. Bearing retainer
17) Install rear axle shaft to rear axle housing and tighten bearing
(e)
retainer nuts to specified torque.
NOTE:
When installing rear axle shaft, be careful not to cause
damage to oil seal lip in axle housing.
Tightening Torque
(e): 23 N
18) For vehicle with ABS, tighten wheel speed sensor bolt to speci-
fied torque.
Tightening Torque
(f): 21 N
.
m (2.3 kg-m, 17.0 lb-ft)
.
m (2.1 kg-m, 15.5 lb-ft)
Hide quick links:
Advertisement
Chapters
Table of Contents
