Suzuki SQ416 Service Manual page 94
Hide thumbs
Also See for SQ416:
- Service manual (118 pages) ,
- Owner's manual (266 pages) ,
- Service manual (731 pages)
Table of Contents
Advertisement
1. Cutout
2. Oil pan gasket
38) Lubricate new O-ring with A/T fluid and attach it to grommet of
solenoid wire harness. Then connect solenoid wire harness to
transmission case and fix it with solenoid wire harness clamp.
Connect each connector to solenoid. And install new gasket
and brake applying cover.
Tightening torque
Brake applying cover bolt: 10 N
39) Using a plastic hammer, connect forward clutch applying tube
(1), lube applying tube (2), reverse brake applying tube (3) and
brake applying tube (4) in such order as shown in figure.
40) Install 2 oil pan magnets to transmission oil pan in such way
that they do not interfere with oil tubes and install transmission
oil pan with new oil pan gasket.
NOTE:
Align cutout in oil pan gasket with that in transmission
case.
Tightening torque
Transmission oil pan bolt: 4.5 N
41) With wood rough key attached to output shaft, install sensor ro-
tor by aligning its key groove with wood rough key and install
C-ring by using special tool.
Special tool
(A): 09920-76010
1. Retaining ring
42) For G16 engine model, install adapter case (1) with new adapt-
er gasket to transmission case and tighten adapter case bolts
to specified torque.
Tightening torque
Adapter case bolt (a): 35 N
AUTOMATIC TRANSMISSION (4 A / T) 7B1-23
.
m (1.0 kg-m, 7.5 lb-ft)
.
m (0.45 kg-m, 3.3 lb-ft)
.
m (3.5 kg-m, 25.5 lb-ft)
Hide quick links:
Advertisement
Chapters
Table of Contents
