Suzuki SQ416 Service Manual page 15
Hide thumbs
Also See for SQ416:
- Service manual (118 pages) ,
- Owner's manual (266 pages) ,
- Service manual (731 pages)
Table of Contents
Advertisement
(g)
1. Plug cap
3. Container
2. Vinyl tube
19) Connect brake pipes to wheel cylinders (right & left) and tighten
brake pipe flare nuts to specified torque.
Tightening Torque
.
(g): 16 N
m (1.6 kg-m, 11.5 lb-ft)
20) Install brake drum (right & left). For details, refer to SECTION
5C "BRAKE DRUM INSTALLATION".
21) Refill differential gear housing with new specified gear oil. Re-
fer to "ON-VEHICLE SERVICE" in SECTION 7F for refill.
22) Fill reservoir with brake fluid and bleed brake system.(For
bleeding operation, see SECTION 5.)
23) Install wheel and tighten wheel nuts to specified torque.
Tightening Torque
.
(h): 100 N
m (10.0 kg-m, 72.5 lb-ft)
24) Upon completion of all jobs, depress brake pedal with about 30
kg (66 lbs) load three to ten times so as to obtain proper drum-
to-shoe clearance.
Adjust parking brake cable (for adjustment, see SECTION 5C
of this manual.)
25) Tighten parking brake lever cover screws.
26) Lower hoist.
REAR SUSPENSION 3E-7
Hide quick links:
Advertisement
Chapters
Table of Contents
