Command Line Call - Siemens SINUMERIK 840D sl Operating Manual
Sinumerik integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Create MyConfig - Topo
6.5 Command line call
6.5
Command line call
Call
The commands subsequently shown and all switches and arguments that are used should be
written in one line to a batch file or a command line interface.
The meaning of the switches and arguments is described in the following table Topo
parameters.
Starting Topo
Topo is started with the subsequent command, and a file can be displayed and edited.
Topo <topology path>
Comparing topologies
With the subsequent command, 2 topologies can be compared; this means that two files can
be displayed and edited.
Topo /diff <file1> <file2>
Automated Topo deployment
Create MyConfig Topo can be executed in command line mode for the automated deployment.
Topo /silent <Topology path>
Notes
Observe the following notes for the command line call:
Note
Observe the sequence of the switches
The switches should be written to in the specified sequence.
When doing this, observe the Section "Call" and the table "Significance of the switches".
Note
Path data
● Paths must be specified in double inverted commas if spaces are included
Example: "C:\Path with spaces\Expert_Logfile.log"
● Paths may never end with '\'.
376
/deploy [<Deployment name>] [/deploydir <Deployment directory>]
/target (UST|UTZ27|UTZ44|UTZ45|UTZ47) [/autocomplete]
[/log <Log file>]
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
- Quick Links:
- Preface
Hide quick links:
Advertisement
Table of Contents
