Siemens SINUMERIK 840D sl Operating Manual page 192
Sinumerik integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Create MyConfig - Expert
4.4 Project folder
Information on the system variables·can be found in the section System variables for the NCU/
PPU result state dialog (Page 294).
Further general information on the system variables can be found in the Reference list system
variables (Page 283) section.
Dialog / Operating instructions
You can find additional information on the property groups "Dialog" and "Operating
instructions" under Package configuration (configuration) (Page 121).
Data backup CF card
The "NCU result" dialog page is used to back up all of the data of the NCU which runs under
the Linux operating system.
The following settings are available for the "Data backup CF card" and are activated when the
package is executed:
Perform backup
Setting disabled
Archive
The settings for the archive are defined by the project engineer and are not displayed during
package execution.
The archive can be used for diagnostics. It is not required for the production or the upgrade of
a machine.
The following settings are available for the "Archive":
Perform backup
Dialog scripts
Under "Dialog scripts", entry "Scripts", via the button
state' Edit event scripts".
You can edit scripts here that are to be executed at selectable times during package execution.
192
Yes
Here, you specify whether a data backup of the CF card including the archive data
for the NC, PLC and DRV areas is to be created after the package execution.
No
With the setting "Yes", the data backup is saved with the name '<CF card ID>_re‐
sult.tgz'.
The file is stored in the folder based on the CF card ID which is located next to the
package after the package execution.
Yes
Here, you specify whether the settings made during the configuration are to be
blocked so that they can only be viewed by the operator, but not changed.
No
Yes
Here, you specify whether an archive with the NC, PLC and DRV areas is to be
created after the execution of the package.
No
The backup is performed for the NC area with the setting that all data is to be saved.
With the setting "Yes", the archive is saved with the name 'Result_<date>.arc'.
The archive is stored in the folder based on the name of the CF card ID which is
located next to the package after the package execution.
you open the "Dialog 'NCU/PPU result
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 11/2016, A5E36537479B-AD
- Quick Links:
- Preface
Hide quick links:
Advertisement
Table of Contents
