Pre-Installation Checklist - Bosch AutoDome VG4-A-9230 Series Installation Manual

Modular camera system
Table of Contents

Advertisement

AutoDome Modular Camera System
1.1.3
Tools Required
5 mm Allen wrench (supplied)
Small, straight-blade screwdriver - 2.5 mm (0.1 in.)
No. 2 Phillips screwdriver
Socket wrench and 9/16-in. socket
Banding tool (Bosch P/N TC9311PM3T) - if installing a mast (pole) mount
1.2

Pre-installation Checklist

1.
Determine the location and distance for the Power Supply Box based on its voltage and
current consumption. See Chapter 4: Cable and Wire Standards for wiring information and
distances.
2.
Use only UL listed liquid tight strain reliefs for conduits to the Power Supply Box to
ensure that water cannot enter the box. You must use water tight conduits and fittings to
meet NEMA 4 standards.
WARNING! Power and I/O cabling must be routed separately inside different permanently
!
earthed metal conduits.
3.
Route all rough wiring including: power, control, video coax, alarms I/O, relay I/O, and
fiber optic cabling. See Chapter 4: Cable and Wire Standards for video and control proto-
col methods.
WARNING! Install external interconnecting cables in accordance to NEC, ANSI/NFPA70 (for
US application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in
accordance to local country codes for all other countries.
!
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
4.
Choose the appropriate AutoDome model (indoor or outdoor) for the environment in
which it will be used.
5.
Choose the appropriate mounting kit to use, depending on the location of the AutoDome,
either wall mount, corner mount, or mast (pole) mount.
CAUTION! Select a rigid mounting location to prevent excessive vibration to the AutoDome
camera.
Bosch Security Systems, Inc.
Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts | en 5
Installation Manual
F01U010921 | 1.0 | 2006.10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autodome 300 seriesAutodome vg4 seriesVg4-323-ets

Table of Contents