Table of Contents
Advertisement
48
en | Installing the In-Ceiling Mount
3.9
Align and Install Camera Module
The Camera Module connector attaches to the In-Ceiling Housing CPU board.
1.
Align the yellow locking tab on the base of the Camera Module to the yellow label on the
CPU Module and press the camera base onto its connector.
2.
Then rotate the camera clockwise (approximately 60 degrees) until it locks in position.
Fig. 3.13 Install Camera Module and Bubble
F01U010921 | 1.0 | 2006.10
Installation Manual
AutoDome Modular Camera System
Bosch Security Systems, Inc.
Advertisement
Table of Contents
