38
en | Configuration
North point
–
–
Alternative home position
Click Set to set the alternative home position for the camera.
Click Clear to clear the alternative home position.
4.4.8
Pre-positions and Tours
The camera can store up to 256 preset scenes. You can define the individual scenes that
comprise a Pre-position Tour.
You define individual pre-position scenes, then use these scenes to define the Pre-position
Tour. The tour starts from the lowest scene number in the tour and progresses sequentially to
the highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the Pre-position Tour unless removed.
Sequence settings
To define and edit an individual pre-position:
–
–
–
–
–
–
–
–
–
–
To define a Custom tour:
–
2022-12 | V01 | DOC
Click the Set button to overwrite the existing North point. A dialog box appears with the
message, "Overwrite North point?" To confirm, click OK. To cancel, click Cancel.
Click the Clear button to reset the North point to factory defaults. A dialog box appears
with the message, "Reset North point to factory defaults?" To confirm, click OK. To
cancel, click Cancel.
Set the pre-position in the video image.
–
Use the PTZ controls to move the device into position.
–
Using the Live preview window as reference, navigate to the scene that you want to
define as a pre-position.
Click the button Add pre-position ("+") to define the pre-position.
Select a number for the pre-position, from 1 to 256.
Type an optional name for the pre-position, up to 40 characters long.
Click OK to save the pre-position to the list Pre-positions.
To include the pre-position in a standard tour, select the checkbox to the left of the field
"Include in standard tour (marked with *)". An asterisk (*) appears to the left of the
name in the list Pre-positions.
To delete a pre-position from the list, select the pre-position and click the Delete pre-
position button.
To overwrite an existing pre-position:
–
Use the PTZ controls to navigate to the new pre-position.
–
In the list Pre-positions, select the pre-position that you want to overwrite.
–
Click the button Overwrite pre-position (disk icon) to apply the new pre-position to
the existing pre-position.
–
To change the name of the pre-position, double-click the pre-position in the list.
Then, change the name in the dialog box Edit Pre-position and click OK.
To view a pre-position in the preview window, select the pre-position in the list and click
the button Show pre-position (eye icon).
To view a pre-position from the Live page:
–
Click a pre-position number in the list Pre-positions.
OR
–
Use the keypad and the button Show pre-position in AUX Control.
Create the individual pre-positions.
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.