Table of Contents
Advertisement
SAFETY SUMMARY
COMMON SAFETY PRECAUTIONS
Given below are safety precautions that do not appear in the manual.
● Failure due to continued use in faulty condition!
■ Continuing use of the instrument in a faulty condition could cause an electric
shock or fire hazard. If an abnormality such as unusual noise, odor or
fuming occurs during use of the instrument, immediately shut off power to
the instrument and disconnect the power cord plug from the outlet.
After this, take proper safety measures and then notify our sales or service
representative nearest you.
● Injury due to irradiation with laser beam!
■ The CD-ROM or CD-R/W drive in the PC incorporates a laser source.
In normal use of the PC equipped with a laser source, a laser beam harmful
to the human body is not irradiated outside of the equipment. But if a
leakage occurs and the laser beam strikes a person's eyes, it could damage
the person's eyesight. Be sure to read the safety precautions on laser
beam described in the PC's instruction manual and also observe the
following instructions.
• Do not open the panel of the laser equipment. There is no part
repairable by the customer.
• Do not attempt an adjustment of laser equipment control operation that is
not described here.
WARNING
SAFETY - 3
Advertisement
Chapters
Table of Contents
Troubleshooting
