Samsung DCS Programming Manual page 206
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 732
DESCRIPTION:
This MMC gives more flexibilities to the system by making desired Digit Translation
Table ,which performs the translation from dialed digit(s) into destination parts.
Destination parts could be an Intercom number, station group, REPEAT , Change Greeting
Message Code and AA Plan Table.
If you selected as REPEAT, dialed digit may be bypassed without translating.
AA TRAN TABLE 01 and 02 can have up to 100 entries each.
The other tables(03-12) have a 25 entries.
DESTINATION :
STATION,STATION GROUP,AA TRAN NO, REPEAT and CHANGE GREETING MESSAGE
CODE
If you press A Button in DESTINATION field you are able to enter AA TRAN NUMBER. When
you wish to enter the same index number( 01-12) of AA TRAN TABLE as being programmed
index number, then the system will not accept with the indication of NOT PERMIT on LCD.
For instance, if you are in the below step;
AA TRAN TB(02)
001: →_
if you press A Button then LCD will show P;
AA TRAN TB(02)
001: →P_
if you enter the same table index number 02 which is being programmed one;
AA TRAN TB(02)
001: →P02
then you will hear error tone and LCD will show as follows;
AA TRAN TB(02)
NOT PERMIT
If you press B Button in DESTINATION field you are able to enter REPEAT.
If you press C Button in DESTINATION field you are able to enter CHANGE
MESSAGE CODE.
AA TRANS TABLE
PROGRAMMING
December 1996
GREETING
Advertisement
Table of Contents
