Samsung DCS Programming Manual page 187
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 722
DESCRIPTION:
Allows for the customizing of programmable keys on specific electronic keysets on the DCS
system. Buttons 1 and 2 are set as CALL buttons by default. Features are entered via the dial pad
key by pressing the dial pad number the required steps to select the feature. For example, for
OHVA the number 6 is pressed three times. If the BOSS key is required, press 2 for the first letter
B, and then use the UP or DOWN key to change selection from BARGE to BOSS.
COUNT
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 722
Display shows
2.
Enter selected station number (e.g., 205)
OR
Press UP or DOWN key to select station number and
press RIGHT soft key to move cursor
3.
Enter selected key number (e.g., 18)
OR
Press UP or DOWN key to select key number
and press RIGHT soft key to move cursor
4.
Using above chart pressing dial pad key
number to make selection
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor to step 5 to enter
extender if required or to return to step 2
STATION KEY PROGRAMMING
DIAL KEYPAD
1
®
AAPLAY
DICT
GPIK
LCR
MMPA
PAGE
TG
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
2
3
BARGE
CALL
DICT
FAUTO
HLDPK
IOG
LCR
LCR
NEW
OHVA
REJECT
SG
UA
VDIAL
DISPLAY
[201] KEY PROG.
01:CALL1 →
[205] KEY PROG.
01:CALL1 →
[201] KEY PROG.
18:NONE →_
[201] KEY PROG.
18:NONE →GPIK_
PROGRAMMING
December 1996
Advertisement
Table of Contents
