Samsung DCS Programming Manual page 110

Hide thumbs Also See for DCS:
Table of Contents

Advertisement

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 421
DESCRIPTION:
Provides a method of assigning a incoming MSN call to a specific station.
If any entry in MSN DIGIT TABLE matches to incoming call's called party number,
the specific station is altered if it is programmed to Accept the call
OR
the call is cleared if it is programmed to Reject the call.
If the Incoming called party number does not have matching entry in MSN table, then the
operator is altered.
Using this operation, you can give each MSN number to specific station and you can give option ;
when destination is busy,incoming call must be cleared or camp-on that station to alarm there is
another call.
There are total 8 entries on a trunk basis and each entry consists of the following fields.
0. DIGITS
1. DAY DEST
.
2. NIGHT DEST
3. CALL WAIT
4. OPTION
NOTE:
For each BRI access, two adjacent ports are assigned, you only have to change the value for any one
of the two ports from a BRI access, then the value for the other port will be changed automatically.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
Digits to be received. Wild card(Q) is valid entry and 10 digits
maximum.
Destination in day mode and it could be a station, a station group.
Repeat (B) will be acceptable to the system if received-digit is within
numbering plan for a station or station group.
Destination in day mode and it could be a station, a station group.
Repeat (B) will be of same result at 1. DAY DEST.
Toggles YES or NO, if YES then the call will be camped-on at busy
destination while NO gives busy indication.
Accept: the selected destination party will be alerted.
Rejected: the call is cleared.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PROGRAMMING
December 1996
MSN DIGIT
then
either

Advertisement

Table of Contents
loading

Table of Contents