Samsung DCS Programming Manual page 114
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 423
DESCRIPTION:
This program allows the system to choose the function of each BRI access. You can set a BRI access
as "TRUNK" to which a ISDN C.O. line is connected, or as "STATION" to which a ISDN terminal is
connected.
NOTE:
Any change made in this MMC will take effect only after restart of the BRI Card. Use MMC 418 to
restart the card.
For each BRI access, two adjacent ports are assigned, you only have to change the value for any one
of the two ports from a BRI access, then the value for the other port will be changed automatically.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 419
Display shows
2.
Dial BRI trunk number (e.g.,703) or press UP
or DOWN key to select the port.
Use the RIGHT soft key to position the cursor under
TRUNK(or STATION)
3.
Press UP or DOWN key to make selection (TRUNK or
STATION)
Use the RIGHT soft key to position the cursor under the
port number again.
4.
For the other ports, repeat from 2. To 3.
5
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: MMC 419 BRI OPTION
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
TRUNK
MMC 424 S0 MAPPING
MMC 418 CARD RESTART
PROGRAMMING
December 1996
S/T MODE
DISPLAY
[701] S/T MODE
TRUNK
[703] S/T MODE
TRUNK
[703] S/T MODE
STATION
Advertisement
Table of Contents
