Samsung DCS Programming Manual page 144
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 604
DESCRIPTION:
Allows the technician to assign a keyset to any of the four internal paging zones and all page
(page plus ∗). The total number of keysets that can receive a page is limited to 80. A keyset may
be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as "1" in a zone
column, it will receive pages for that zone. If the keyset is flagged as "0," it will not receive pages
for that zone. Keysets can receive pages for more than one zone.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 604
Display shows
2.
Enter index number (01–80, e.g., 05)
via dial key pad
OR
Press UP or DOWN key to make selection And press
RIGHT soft key to move cursor
3.
Enter station number (e.g., 205) via dial key pad
OR
Press UP or Down key to make selection and press
RIGHT soft key to move cursor
4.
Move cursor under page zone desired by
pressing UP or DOWN key and enter the digit 1 under
zone and press RIGHT soft key to return to step 2 to
continue with entries
5.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NO STATIONS ASSIGNED
RELATED ITEMS: MMC 723 SYSTEM KEY PROGRAMMING
ASSIGN STATION TO PAGE ZONE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear entry
ALL ZONE IS SET
PROGRAMMING
December 1996
DISPLAY
ENTRY:STN :1234*
01:NONE:00001
ENTRY:STN :1234*
05:NONE:00001
ENTRY:STN :1234∗
05:205
:00001
ENTRY:STN :1234∗
05:205
:01001
Advertisement
Table of Contents
