Samsung DCS Programming Manual page 111
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
ACTION
1.
Press TRSF 421
Display shows
2.
Enter trunk number (e.g.,704)
OR
Press UP or DOWN key to scroll through ISDN PORT and
press RIGHT soft key to move cursor
3.
Enter the location (e.g.,4)
OR
Press UP or DOWN to select location and press RIGHT
soft key to move cursor.
Max. location is 8.
4.
Enter in digits to be translated (e.g.,4603881)
via dial key pad and press RIGHT soft key to move to the
destination selection..
Max. digit is 10.
5.
Enter destination via dial key pad for day mode
OR
Press UP or DOWN key to make selection
If valid entry, system advances cursor
6.
Enter destination via dial key pad for night mode
OR
Press UP or DOWN key to make selection
If valid entry, system advances cursor
7.
Press RIGHT soft key to move cursor under CW(CallWait)
option. Use UP or DOWN key to select ON/OFF.
Press RIGHT soft key to move cursor under
ACCEPT/REJECT option.
Press RIGHT soft key to go back to step 3.
Follow same procedure to add more entries in MSN
table.
8.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: MMC 419 BRI OPTION
MMC 420 PRI OPTION
MMC 714 DID NUMBER TABLE
PROGRAMMING
December 1996
DISPLAY
[701]MSN DGT (1)
DGT:
[704]MSN DGT (1)
DGT:
[704]MSN DGT (4)
DGT:
[704]MSN DGT (4)
DGT:4602831
[704]MSN DGT (4)
D:204
N:
[704]MSN DGT (4)
D:204
N:202
[704]MSN DGT (4)
CW:NO OPT:ACEPT
Advertisement
Table of Contents
