Samsung DCS Programming Manual page 104
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 417
DESCRIPTION:
This option is used to enable/disable the CRC4 generation and checking. It is useful with some
networks which do not support CRC4 framing but only PCM30 framing. By default, the CRC
option is ON.
NOTE:
After changing this option, MMC 418 must be used to restart the card to make the change effective.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 417
Display shows
2.
Press RIGHT soft key to move cursor under slot number.
Use UP or DOWN key to select slot number
OR
Dial slot number using keypad (e.g.,slot number = 5)
3.
Press RIGHT soft key to move cursor under ON. Use UP
or DOWN key to select ON/OFF and press RIGHT soft
key to return to step 2 to change the option for another
card.
4.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: CRC4 ON
RELATED ITEMS: MMC 418 CARD RESTART
Note: This MMC is not applicable to DCS/Compact System
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PRI CRC4-OPTION
DISPLAY
PRI-TRK C:1 S:3
CRC4 : ON
PRI-TRK C:1 S:5
CRC4 : ON
PRI-TRK C:1 S:5
CRC4 : ON
PROGRAMMING
December 1996
Advertisement
Table of Contents
