Samsung DCS Programming Manual page 109
Hide thumbs
Also See for DCS:
- Programming manual (410 pages) ,
- Technical manual (287 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG DCS
TECHNICAL MANUAL
MMC: 420
DESCRIPTION:
This program allows the system to have the ability of DDI/NORMAL Access and to decide dial
sending mode on an individual port basis to OVERLAP or ENBLOCK.
But if you change one port of dial sending mode,all other ports will be set to same dial sending mode.
If your PRI line is not registered for DDI service at the Central Office, you can use NORMAL service
(e.g.,subaddress or normal trunk incoming service) If you set PRI MODE to DDI, you can service DDI
(Direct Dial Inward) to specific station or station group according to DID NUMBER TABLE.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 420
Display shows
2.
Dial PRI trunk number (e.g.,704) or press UP
or DOWN key to select the port.
Use the RIGHT soft key to position the cursor under
DLMODE
3.
Press UP or DOWN key to make selection (DLSEND or
PRI MODE).Select DLSEND and
press RIGHT soft key to move the cursor under
ENBLOCK. Use UP or DOWN key to select
ENBLOCK/OVERLAP. Press RIGHT soft key to make the
selection.
4.
Use UP or DOWN key to get to PRI MODE.
Press RIGHT soft key to move the cursor under
DDI/NORMAL. Use UP or DOWN key to make the
selection
5
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: MMC 418 CARD RESTART
Note: This MMC is not applicable to DCS Compact System
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
DLSEND : OVERLAP
PRI MODE : NORMAL
MMC 407 TRUNK RING
MMC 714 DID NUMBER TABLE
PROGRAMMING
December 1996
PRI OPTION
DISPLAY
[701] PRI OPTION
DLSEND : ENBLOCK
[704] PRI OPTION
DLSEND : ENBLOCK
[704] PRI OPTION
DLSEND : ENBLOCK
[704] PRI OPTION
PRI MODE : DDI
Advertisement
Table of Contents
