Siemens Sinumerik 840D Operating Turning page 672

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

2.2 Programming example: Front face measuring

The following ShopTurn-program with a measuring cycle is to be pro-

Start a new ShopTurn program, as described in the

previous section 2.1 and give the program the name

"ST_MEASURE_MILLING_1.MPF".

The input window for the program header opens

automatically.

The numbering of the program lines used in the ex-

ample results if at the start the second level was se-

lected with the VSK1.8 "Extension". Here press

VSK2.6 "Settings" and select the following settings.

840D/828D SINUMERIK Operate

Sinumerik 828d