Siemens Sinumerik 840D Operating Turning page 448

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Confirm your inputs by pressing the VSK 8 "Accept".

The following program line is inserted into the pro-

N250 CYCLE952("SEMI_ROUGHING",

"REST_ROUGHING","",1301311,0.25,0.2,0,1,0.1,0.

1,0.2,0.2,0.1,0,1,0,,,,,,2,2,,,0,1,,0,112,1100110)

Program the following G code command:

N260 G0 X200 Z200

Insert another tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "FINISHING_TOOL_35" by using the

blue cursor key on the keyboard.

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N270 T="FINISHING_TOOL_35"

Program the following G code commands by hand:

N290 S280 M4 F0.12

Insert a contour call "CYCLE62" into the program.

Press the VSK 1 "Contour".

The vertical softkey bar with functions for creating

and calling up a contour opens.

Press the VSK 2 "Contour call" to open the input

window for the call up of a contour.

Enter the following name into the input mask:

Confirm your input by pressing the VSK 8 "Accept".

The following line is inserted into the program:

N300 CYCLE62("SPIGOT_BLANK",1,,)

The contour you called up here, will be created at

the end of the program in section 31.

Insert another call up of a contour "CYCLE62" into

the program.

840D/828D SINUMERIK Operate

Sinumerik 828d