Siemens Sinumerik 840D Operating Turning page 466

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Program the last lines of the program and the pro-

gram end, by inserting the following lines:

N170 G0 X400 Z200

Simulate the machining.

In order to start the simulation run, press the HSK

1.7 "Simulation".

The control calculates the simulation parameters

and opens the simulation in the simulation window in

a "Side view" by default.

To view the simulation with a view on the face of the

blank, press the VSK 1.4 "Face view".

840D/828D SINUMERIK Operate

Sinumerik 828d