Siemens Sinumerik 840D Operating Turning page 468

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

3.1 Programming example: Threaded spigot

The program shown below with the call up of different turning cycles is to

be programmed.

Create a new G code programGUIDE-program in ShopTurn, like described

in section 2.1 in this module.

Give the program a name, for example „DIN_TURNING_2.MPF".

Program the first G code lines of the program:

N100 G54 G17 G90

N110 G0 X200 Z200

Now insert a blank for the simulation.

For this, press the HSK 1.6 "Various" to open the

operating area "Various".

Press the VSK 1 "Blank" to open the parameter

mask for the blank.

Insert the values into the parameter mask like

displayed below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following program line is inserted into the pro-

N120 WORKPIECE(,,"","CYLINDER",192,0,-130,-

840D/828D SINUMERIK Operate

Sinumerik 828d