Siemens Sinumerik 840D Operating Turning page 409

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Description:

A simple drilling machining is to be programmed with the programGUIDE

in ShopTurn.

A new G code program is to be created and opened.

The G code lines and the drill cycle must be programmed and the program

is to be simulated.

For this, the data below are to be used:

Drill Ø 8,5 mm (DRILL_D8.5)

Technology data:

F 150 mm/min

2.1 Creating a new programGUIDE program

A new G code program can be created from all operating modes, as fol-

Press the "Program Manager"-key on the keyboard.

The program manager will be opened directly.

Press the "MENU SELECT"-key on the operator

Press the yellow HSK 1.4 "Program Manager".

The program manager opens.

Select a drive where you want to create the program

("NC", "Local drive", "USB"), by pressing a horizontal

Press the VSK 2 "New".

The vertical softkey bar with functions for creating

new programs opens.

Press the VSK 4 „programGUIDE G code" to open

the input mask for creating a new G code program.

Select "Main program MPF".

Enter a name for the program in the "Name" field,

e.g DIN_DRILLING_1.MPF and accept with press-

ing the VSK 8 "OK".

The editor window for entering G code commands

840D/828D SINUMERIK Operate

Sinumerik 828d