Siemens LMV5 Series Technical Instructions page 6
Linkageless burner management system
Hide thumbs
Also See for LMV5 Series:
- Basic documentation (278 pages) ,
- Quick start manual (232 pages) ,
- Manual (39 pages)
Table of Contents
Advertisement
Technical Instructions
Document No. LV5-1000
1-2: LMV5 System Builder
The LMV5 Linkageless Burner Management System is comprised of many components in
addition to the LMV5 itself. Use the following pages to choose the components needed for
your specific application. See pages 20-22 for an LMV5 system order sheet. For additional
technical information about any of the products listed, refer to Appendix B.
Choose one of the following LMV5 options. See page 24 for mounting information.
LMV51.040C1
LMV51.140C1
LMV52.240B1
LMV52.440B1
At least one transformer is required per LMV5. A second transformer may be necessary
depending on the size and number of actuators present in the system (see Section 2 – Wiring).
Refer to page 26 of this section for mounting information.
AGG5.210
Section 1
Control Panel Components
Base Unit – Qty (1) Required
Dual fuel burner control with electronic fuel-air ratio
control of up to 3 actuators (4 connected). Requires
an external PID controller
Same features as LMV51.040C1. Includes a PID load
controller capable of temperature and / or pressure
control and a programmable analog output
Same features as LMV51.140C1 for up to 5 actuators
(6 connected). Includes a closed loop VFD control,
integrated O
and temperature / time based FGR hold
Same features as LMV52.240B1 as well as enhanced
O
trim control designed for low NO
2
pre-mix burners and high percentage FGR (>25%)
applications
Transformer – Qty (1) or (2) Required
120 VAC to 12 VAC transformer (three secondaries)
Page 2
HOME
trim, fuel meter reading (gas and oil),
2
LMV Series
mesh-style
x
SCC Inc.
Hide quick links:
Advertisement
Chapters
Table of Contents
