Brake Functionality (Not Effectively Stopping The Logiq E9); Worn Surface From Brake Arm - GE LOGIQ E9 Service Manual

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5180483-100, R

Brake Functionality (not effectively stopping the LOGIQ E9)

Over time the Brake Arm may have worn a groove into the rubber of the caster wheel. The deeper this

groove becomes, the less effective the brakes will be. Observe the rubber on the wheel, if you notice

worn surfaces in the inside of the rubber or notice debris, replace the caster.

Brake Arm (1) wearing inside, inner diameter of the caster wheel (2). Images are for reference only, the

casters CANNOT be serviced.

PROPRIETARY TO GE

Figure 7-206 Worn Surface from Brake Arm

Section 7-9 - Troubleshooting Tips