GE LOGIQ E9 Service Manual page 168
Hide thumbs
Also See for LOGIQ E9:
- Service manual (808 pages) ,
- User manual (256 pages) ,
- Technical publication (127 pages)
Table of Contents
Advertisement
D
5180483-100, R
IRECTION
Table 3-15
3.
4.
5.
6.
3 - 56
PROPRIETARY TO GE
. 7
EV
Print Button Setup - R4.x and later
NOTE: Print button actions can also be modified per model (abdomen, etc.) by settings in
Utility -> Application -> Print Controls. Inspect them when print button behavior differs from
expected.
M&A only (no images):
Use this to generate a Structured Report for the measurements and calculations of the exam
currently open.
See:
3-9-10 "Structured Reporting" on page 3-73
Still Images:
Format:
Ultrasound Image: Stores a single DICOM frame (bitmap of the image), along with the raw
data. This format captures the video area. It allows measurements without calibration.
(Print buttons always store an image's raw data to the clipboard, for both clips and single-
frames – with one exception for Volume File Format (see below). Whether raw data gets sent
to an Image Storage Service depends on the service's settings.)
Secondary Capture – Image, Video, or Screen: Stores a screen capture of a selected area:
Image Area, Video Area, or Whole Screen. A Secondary Capture contains no calibration data,
just pixel data. Thus it requires manual calibration for measurements, if you recall the image
on the LOGIQ E9 or review it on the PACS. Measurements without calibration use pixels as
the unit.
Whether the image is a Single-frame, Clip, or Secondary Capture: dual and quad screen
images are sent as secondary captures to a PACS. Measurements on these types of images
are in pixels.
Note about "bitmap": Bitmap does not refer to a file in ".bmp" format. The terms "image",
"frame", and "bitmap" are interchangeable in a way. For multi-frame images it makes sense to
say frame. On the other hand, DICOM is all about images; the image portion of the file (as
opposed to the header) is really nothing more than a bitmap or screen capture.
Section 3-9 - Connectivity Setup and Tips
LOGIQ E9 P
Attributes
for additional information.
Continued on next page.
Continued on next page.
S
M
ROPRIETARY
ERVICE
ANUAL
Advertisement
Table of Contents
Troubleshooting
