System Does Not Power Off / Shutdown - GE LOGIQ E9 Service Manual

Hide thumbs Also See for LOGIQ E9:

Table of Contents

5180483-100, R

System Does Not Power Off / Shutdown

Is the ON/OFF switch

Shutdown the scanner from a software

screen or depress the ON/OFF switch.

Did the scanner Shut Off?

PROPRIETARY TO GE

Figure 7-149 Power Off / Shutdown Flowchart

illuminated with

a green color?

Restart the scanner.

Section 7-8 - Troubleshooting Trees

If the ON/OFF switch is illuminated

with an amber color, the scanner is in

stand-by mode which indicates that it

has been Shut-Off, but the power

switch in the back is on.

If the ON/OFF switch is not illuminated

at all, the scanner has been Shut Off

and Powered Down in the back.

Depress and hold the ON/OFF switch

on the scanner for approximately 10

If the scanner fails to Shut Off, turn off

the power switch in the back of the

unit and wait about 20 seconds to turn

it back on. Check that the system

powers ON and OFF normally.