Transmit Signal Path And Transmit/Receive (T/R) Signal Path; Card Rack - Gfi Configuration - GE LOGIQ E9 Service Manual

Hide thumbs Also See for LOGIQ E9:

Table of Contents

PROPRIETARY TO GE

5180483-100, R

Transmit Signal Path and Transmit/Receive (T/R) Signal Path

Figure 7-181 Card Rack - GFI Configuration

The transmit signal is generated on the GTX Boards, then passes across the Front Planes to the GRLY

The GRLY Board passes the transmit signal to the transducer.

The echoes the transducer receives from the transmit signals generated on GTX1, are passed on to the

GRX64 Board.

GTX1 Board passes transmit signals to the Front Planes, the Front Planes pass signals to the GRLY

Board, GRLY Board passes signals to the transducer, the transducer passes signals to the GRX64.

The echoes the transducer receives from the transmit signals generated on GTX2 and GTX3, are

passed on to the GRX128 Board.

GTX2 and 3 Boards pass transmit signals to the Front Planes, the Front Planes pass signals to the

GRLY Board, GRLY Board passes signals to the transducer, the transducer passes signals to the

Section 7-9 - Troubleshooting Tips