Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | EN54-16: 2008
Clause / Requirement
7.9 Voice alarm condition output
(option with requirements)
The VACIE may have provision for transmitting a signal that
is in the voice alarm condition. In this case, it shall activate
the output only in the voice alarm condition.
Bosch Security Systems | 2011-02
Compliance
Praesideo is compliant.
The Praesideo system transmits a signal that it is in the
voice alarm condition via control output contacts and the
Open Interface.
An output contact must be configured as voice alarm
activated indicator (Emergency alarm indicator). The
Praesideo system then activates the output contact when it
enters the voice alarm condition and deactivates the output
contact when it leaves the voice alarm condition (i.e. the
voice alarm condition is reset).
The Praesideo system also indicates this condition via the
Open Interface.
en | 34
Signature
Advertisement
Table of Contents
