Installation; Operation - Bosch Praesideo 3.5 Installation And User Instructions Manual

Digital public address and emergency sound system
Table of Contents

Advertisement

Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories
Note
The pin numbers are also indicated on the inside
of the connector.
For detailed connector assembly instructions,
see appendix B.
Warning
For safety reasons, you must use a current
limited external power supply complying with
the 60065 standard for audio/video usage or
equivalent, with a maximum output current of
5A, or you must use an external fuse (5A max,
slow) in the wiring to the Kycon KPP-4P
connector.
For application in emergency sound systems in
Europe, the installer must use a power supply
with EN54-4 certification.
Caution
For USA: only use a power supply of the type
Mean Well PLN-30-24, PLN-30-36,
PLN-30-48, PLN-60-24, PLN-60-36,
PLN-60-48, PLN-100-24, PLN-100-36 or
PLN-100-48.
For CANADA: only use a power supply of the
type Mean Well PLN-30-24, PLN-30-36,
PLN-60-24, PLN-60-36, PLN-100-24 or
PLN-100-36.
Other types of power supply are not tested with
Praesideo and may cause harm.
Bosch Security Systems | 2011-02

25.4 Installation

The network splitter can be attached to a wall or any
other flat surface using a bracket (see figure 25.7). The
distance (d) between the holes in the bracket is 40 mm.
figure 25.7: Installation
Mounting of this bracket and the unit on a drywall sheet
construction requires screws with a minimum screw
length of 22 mm (7/8") and a minimum diameter of
2.5 mm (3/32"). Mounting was evaluated for use on a
drywall surface only.

25.5 Operation

table 25.2: Status LED indications
Yellow
Green
Status
(Fault)
(Power)
Off
Off
No power
On
Off
No network or network fault
Off
On
Functioning correctly
en | 267

Advertisement

Table of Contents
loading

Table of Contents