Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration
42. 1 0 Multi Channel Interface
42.10.1 Add a multi channel interface
Adding a multi channel interface to the system
definition is similar to adding a power amplifier (see
section 42.4.1.). Go to Configure > System definition >
Multi ch interface, click the Add button and:
•
Enter a name for the multi channel interface in the
Name field. The name may consists of up to 16
characters.
•
Enter the hexadecimal serial number of the
Multi Channel Interface in the Serial number field.
figure 42. 1 7: Multi channel interface definition
42.10.2 Delete a multi channel interface
Deleting a multi channel interface from the system
definition is similar to deleting a power amplifier (see
section 42.4.2). Go to Configure > System definition >
Multi ch interface, select the multi channel interface that
has to be deleted and click the Delete button.
Bosch Security Systems | 2011-02
42. 1 1 Call Stacker
42.11.1 Add a call stacker
Adding a call stacker to the system definition is similar
to adding a power amplifier (see section 42.4.1.). Go to
Configure > System definition > Call stacker, click the Add
button and:
•
Enter a name for the call stacker in the Name field.
The name may consists of up to 16 characters.
•
Enter the hexadecimal serial number of the call
stacker in the Serial number field.
figure 42. 1 8: Call stacker definition
42.11.2 Delete a call stacker
Deleting a call stacker from the system definition is
similar to deleting a power amplifier (see section 42.4.2).
Go to Configure > System definition > Call stacker, select
the call stacker that has to be deleted and click the Delete
button.
Note
When the last call stacker is removed from a
configured system, all call macros that use a call
stacker for their routing and timing schemes will
be updated to the default schemes.
en | 338