Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 4 | Amplifiers
10
Basic Amplifiers
10. 1 Introduction
The basic amplifier is available in these versions:
•
PRS-1B500: 1 channel, 500 W.
•
PRS-2B250: 2 channels, 2 x 250 W.
•
PRS-4B125: 4 channels, 4 x 125 W.
•
PRS-8B060: 8 channels, 8 x 60 W.
The basic amplifier is a high efficiency class-D power
amplifier for public address and emergency sound
systems and is designed as an extension to the Praesideo
system but can also work as a stand alone amplifier. If
not used as a stand alone amplifier, the basic amplifier is
used in conjunction with the multi channel interface
which provides the audio signals and control.
Audio input
Multi Channel
Interface
Audio input
Multi Channel
Interface
Mains
48 V Back-up
figure 10. 1 : Block diagram of a basic power amplifier
Bosch Security Systems | 2011-02
The basic amplifier is completely supervised and fault
events are reported via the multi channel interface to
the Praesideo network controller.
Loudspeaker lines and loudspeakers connected to a
basic amplifier channel can be supervised by using the
LBB4441 and LBB4443 supervision boards. The multi
channel interface acts as a supervision controller, so no
LBB4440 is required.
In contrast to the power amplifiers, the basic amplifiers
do no offer built-in audio processing functions as
equalization, delay and automatic volume control.
LED Indicators
Priority Switching
+ Supervision (2)
Priority Switching
+ Supervision (1)
Power Supply
Class D
(2)
Class D
(1)
en | 166
Loudspeaker Out A
Loudspeaker Out B
Spare In
Loudspeaker Out A
Loudspeaker Out B
Spare In
Advertisement
Table of Contents
