4.15.7
ADU lower transport roller
(1)
Take off the ADU clutch.
( P. 4-139 "4.15.6 ADU clutch (CLT1)")
(2)
Remove the ground plate, 1 E-ring and 1
bushing, and then take off the ADU lower
transport roller.
4.15.8
ADU upper transport roller
(1)
Take off the ADU.
( P. 4-134 "4.15.1 Automatic Duplexing
Unit (ADU)")
(2)
Remove 4 screws and take off 2 brackets.
(3)
Take off the transfer unit.
(4)
Disconnect 1 connector, remove 2 screws
and take off the bypass feed unit.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Ground plate
E-ring
Bushing
ADU lower transport roller
Fig. 4-398
Transfer unit
Bracket
Fig. 4-399
Bypass feed unit
Fig. 4-400
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 141
Bracket
DISASSEMBLY AND REPLACEMENT
4