Registration Roller (Rubber) - Toshiba e-STUDIO206L Service Manual

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO206L:

Table of Contents

Remove 2 screws and take off the lower tray-

up motor from the bracket.

Pay attention to the size (length) of the

screws. If incorrect ones are used, the motor

could be damaged.

Registration roller (rubber)

Take off the transfer unit

 P. 4-99 "4.11.17 Transfer unit"

Remove 1 screw and then take off the

bracket while holding the registration roller.

Lift up the rear side of the registration roller

and then pull out the roller to the rear side.

Lower drawer tray-up motor

Registration roller (rubber)

e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507

DISASSEMBLY AND REPLACEMENT

Show Quick Links

Table of Contents