4.9.26
Upper tray-up motor (M11)
(1)
Pull out the upper drawer.
(2)
Take off the rear cover.
P. 4-3 "4.1.6 Rear cover"
(3)
Disconnect 1 connector and take off the
harness clamp from the bracket.
(4)
Remove 2 screws and take off the upper
tray-up motor along with the bracket.
(5)
Remove 2 screws and take off the upper
tray-up motor from the bracket.
Notes:
Pay attention to the size (length) of the
screws. If incorrect ones are used, the motor
could be damaged.
© 2011-2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-223
Bracket
Fig. 4-224
Upper drawer tray-up motor
Fig. 4-225
e-STUDIO206L/256/306/356/456/506 / 207L/257/307/357/457/507
4 - 79
DISASSEMBLY AND REPLACEMENT
4