Table of Contents
Advertisement
C h a n g e
E N T E R = Y
• When the screen is displayed, press the ENTER key to start operation using the new settings,
or press the CANCEL key to correct or cancel entries. In the latter case, the screen turns back
to the setting screen to enable re-entries. Press the CANCEL key to cancel entries made so far
and to turn to the "Set. (change)" sub-menu.
4.2.6.2
Password
For the sake of security of setting changes password protection can be set as follows:
• Select "Set. (change)" on the "MAIN MENU" screen to display the "Setting change" screen.
• Select "Password" to display the "Password" screen.
• Enter a 4-digit number within the brackets after "Input" and press the ENTER key.
I
n p u t
1 2
• For confirmation, enter the same 4-digit number in the brackets after "Retype".
R e
1 2
• Press the END key to display the confirmation screen. If the retyped number is different from
that first entered, the following message is displayed on the bottom of the "Password" screen
before returning to the upper screen.
"Unmatch passwd!"
Re-entry is then requested.
Password trap
After the password has been set, the password must be entered in order to enter the setting change
screens.
If "Set. (change)" is entered on the "MAIN MENU" screen, the password trap screen "Password" is
displayed. If the password is not entered correctly, it is not possible to move to the "Setting
(change)" sub-menu screens.
s
e
t
t
C A N C E L = N
S e
t
.
(
c
h a n g e )
[
_
3 4 5 6 7 8 9 0 ＜
S e t
.
(
c
h a n g e )
t
y p e
[
_
3 4 5 6 7
8 9 0 ＜
104
i
n g s
?
]
]
6 F 2 T 0 1 7 2
- Quick Links:
- Inverse Time Overcurrent Protection
Hide quick links:
Advertisement
Table of Contents
