Table of Contents
Advertisement
Burn-In Mode
Activating Burn-In
6-4
Troubleshooting: Burn-In Mode
Burn-in mode is a repetitive cycle of elevation calibration and walking
belt revolutions. It can be helpful when attempting to replicate an
intermittent problem for troubleshooting.
WARNING
INJURY TO PERSON - During the burn-in process the
GE T2100 Treadmill will reach maximum elevation and
speed in a repetitive cycle until power is removed. Make
sure you monitor the site at all times.
Make sure there are no customers or patients on or near
the GE T2100 Treadmill during burn-in.
To activate the burn-in mode, do the following:
1. Remove controlling device (CASE, MTC-1) cable or turn off the
controlling device.
2. Unlock the emergency stop switch.
3. Connect the AC power cable on the GE T2100 Treadmill to the wall
outlet.
WARNING
POWER CABLES – Route the AC Power cable away from
moving parts. An AC power cable caught in moving parts
could cause injury to the user and equipment.
GE T2100 Treadmill
2021403-031
Revision A
Advertisement
Table of Contents
Troubleshooting
