Table of Contents
Advertisement
Front Roller Replacement
Roller Bolt
2 Places
7-6
Assembly/Disassembly: Front Roller Replacement
1. Turn the power switch off, disconnect the power cord from the wall
outlet, and remove the shroud.
2. Loosen the drive belt and remove it from the sprocket. See
Motor Replacement"
drive belt.
3. Loosen the walking belt tension bolts on the end of the GE T2100
Treadmill.
Tension Bolts
4. On the drive-belt side of the GE T2100 Treadmill, remove the 3 bolts
fastening the walking belt drive gear to the roller.
5. Locate the roller bolt access hole. Remove the 9/16-inch bolt (one of
two that holds the roller in position).
6. While supporting the free end of the roller, remove the
9/16-inch bolt on the opposite side of the GE T2100 Treadmill.
7. Remove the drive belt gear.
8. Lift the roller up and slide it out of the belt.
GE T2100 Treadmill
2021403-031
on page 7-12 for steps relative to loosening the
"Drive
021
030
Revision A
Advertisement
Table of Contents
Troubleshooting
