Revision A
Assembly/Disassembly: PCBs and Power Supply Replacement
NOTE
Electrostatic discharge can harm the PCB boards and power supply.
The following guidelines help protect the PCB boards and power
supply from ESD damage.
Keep the new PCB boards and power supply in their anti-static
"
bags until they are ready to be installed.
Discharge any static charge you may have built up before
"
handling the PCB boards and power supply. (Touch a metal
surface to discharge a spark.)
Handle the PCB boards and power supply by their edges. Do not
"
touch the semi-conductor components.
1. Turn the power switch off, disconnect the power cord from the wall
outlet, and remove the shroud.
2. Remove the e-box cover.
3. Disconnect any wiring harnesses/connections.
4. Unscrew the mounting screws.
5. Fasten the new PCB/power supply to the e-box using the mounting
screws.
6. Reconnect any wiring harnesses/connections.
7. Replace the e-box cover and the shroud.
8. Calibrate the GE T2100 Treadmill. See
10."
GE T2100 Treadmill
2021403-031
"Self-Calibration"
on page 3-
7-29