Table of Contents
Advertisement
Drive Motor Replacement
7-12
Assembly/Disassembly: Drive Motor Replacement
1. Turn the power switch off, disconnect the power cord from the wall
outlet, and remove the shroud.
2. Unplug the motor control cable from the drive controller.
3. Unplug the motor power cable from the drive controller.
4. Unscrew the wires from the X1 connector that lead to the motor. See
"Drive Controller X1 PIN descriptions"
5. Cut any plastic retaining straps.
Motor Power
Cable
6. Loosen the 4 motor mounting bolts, but DO NOT remove them.
GE T2100 Treadmill
2021403-031
on page 7-22.
Motor Control
Cable
Revision A
033
Advertisement
Table of Contents
Troubleshooting
