Toshiba TLCS-900/H1 Series Manual page 464
Original cmos 32-bit microcontroller
Hide thumbs
Also See for TLCS-900/H1 Series:
Advertisement
The information transmitted by the MICON information command is shown below.
Table 3.21.20 Information Transmitted by MICON Information Command
Micon Information
"TMP92CH21FG"
The information transmitted by the result information command is shown below.
Table 3.21.21 Information Transmitted by Result Information Command
Result
No error
Not received user program error
Received except Intel Hex format error
Over user program size error
Received incorrect address error
Protocol error or other error
54H, 4DH, 50H, 39H, 32H, 43H, 48H, 32H, 31H, 46H, 47H, 20H, 20H, 20H, 20H
Value
00H
When a user program is received without receiving
02H
user program starting command.
04H
When the first data of the user program is not " : "
(3AH).
06H
When more than the value of wIndex is received.
08H
When the user program address is incorrect.
When the user program size is over 10 Kbytes
0AH
When start or result of user program is received
first.
When check SUM is incorrect in
Intel Hex file.
When record type is incorrect in
Intel Hex file.
When address length is more than 2 in
Intel Hex file.
When end record length is not 0 in
Intel Hex file.
92CH21-462
ASCII Code
Error Condition
TMP92CH21
2009-06-19
Advertisement
