Rm-Br300 Main Parts; Joystick Controller; Rm-Br300 Pc Boards; Board - Sony BRC-300 Service Manual
3ccd color video camera / optical multiplex unit
Hide thumbs
Also See for BRC-300:
- Command list (23 pages) ,
- Specifications (8 pages) ,
- Brochure & specs (8 pages)
Table of Contents
Advertisement
2-5. RM-BR300 Main Parts
2-5-1. Joystick Controller
Removing
1. Remove the outer (upper) assembly.
(Refer to steps 1 and 2 in Section 1-5-1.)
2. Disconnect the harness from the connector CN5004 on
the MD-131 board.
3. Remove the four screws, and remove the J sheet and
joystick controller.
MD-131 board
CN5004
Installation
4. Reattach the joystick controller in the reverse order of
steps 2 and 3.
5. Reattach the outer (upper) assembly.
(Refer to step 3 in Section 1-5-1.)
BRC-300/300P
BRU-300/300P
Joystick controller
B3 x 10
B3 x 10
J sheet
2-6. RM-BR300 PC Boards
2-6-1. MD-131 Board
Removing
1. Remove the outer (upper) assembly.
(Refer to steps 1 and 2 in Section 1-5-1.)
2. Disconnect the harness from the connector CN5004 on
the MD-131 board.
3. Remove the four screws, and remove the MD-131
board.
4. Remove the slide knob and DC button.
n
When removing the MD-131 board, be careful not to
lose the slide knob and DC button.
B3 x 5
CN5004
Installation
5. Reinstall the MD-131 board in the reverse order from
steps 2 to 4.
6. Reattach the outer (upper) assembly.
(Refer to step 3 in Section 1-5-1.)
DC button
Slide knob
B3 x 5
MD-131 board
2-25
Hide quick links:
Advertisement
Table of Contents
