Sw-1204 Board - Sony BRC-300 Service Manual
3ccd color video camera / optical multiplex unit
Hide thumbs
Also See for BRC-300:
- Command list (23 pages) ,
- Specifications (8 pages) ,
- Brochure & specs (8 pages)
Table of Contents
Advertisement
4. Remove the two screws, and remove the SE plate.
5. Remove the two screws, and remove the SE-758 board
from the SE plate.
SE-758 board
Installation
6. Reinstall the SE-758 board in the reverse order from
steps 2 to 5.
7. Reattach the side rear assembly and side front assem-
bly. (Refer to step 4 in Section 1-3-1.)
BRC-300/300P
BRU-300/300P
PSW2.6 x 6
SE plate
PSW2.6 x 6
2-2-10. SW-1204 Board
n
As the mounted SW-1204 board is not a specific service
part, it must be replaced together with the whole CN
chassis assembly.
(The CN chassis assembly includes the DC-130 board.)
Removing
1. Remove the base plate. (Refer to Section 1-3-4.)
2. Remove the SY-314 board.
(Refer to steps 2 to 4 in Section 2-2-11.)
3. Remove the blank panel. (Refer to Section 1-3-5.)
4. Remove the EXP chassis assembly and CC-91 board.
(Refer to steps 4 to 6 in Section 2-2-1.)
5. Remove the CN chassis assembly.
(Refer to steps 5 and 6 in Section 2-1-4.)
6. Remove the DC-130 board.
(Refer to step 6 in Section 2-2-3.)
7. Remove the two screws.
8. Unsolder the pins of the external connectors, and
remove the SW-1204 board from the CN chassis
assembly.
CN chassis assembly
SW-1204 board
PSW2.6 x 6
Solders
Solders
2-19
Hide quick links:
Advertisement
Table of Contents
