4. Return the lens forward, and remove the two screws.
5. Release the hook of the camera cabinet upper assem-
bly using a flat-head screwdriver as shown in the
figure, and remove the camera cabinet upper assembly.
Camera cabinet upper
assembly
BTP2 x 6
Installation
6. Reattach the camera cabinet front and camera cabinet
upper assembly in the reverse order from steps 2 to 5.
n
The two tapes A are attached on the camera cabinet
front. When replacing the camera cabinet front, attach
the tapes A to a new camera cabinet front.
Tape A
7. Reattach the side rear assembly and side front assem-
bly. (Refer to step 4 in Section 1-3-1.)
1-4
Flat-head screwdriver
Hook
PSW2 x 6
Tape A
1-3-3. Camera Cabinet Lower
Removal
1. Remove the side rear assembly and the side front
assembly. (Refer to steps 1 to 3 in Section 1-3-1.)
2. Remove the camera cabinet upper assembly.
(Refer to steps 2 to 5 in Section 1-3-2.)
3. Remove the two screws, and release the hook of the
camera cabinet lower from the pin of the camera
assembly.
Pin
Camera assembly
BTP2 x 6
Camera cabinet lower
Hole
Hook
PSW2 x 6
BRC-300/300P
BRU-300/300P