Board And Vc-343 Board - Sony BRC-300 Service Manual
3ccd color video camera / optical multiplex unit
Hide thumbs
Also See for BRC-300:
- Command list (23 pages) ,
- Specifications (8 pages) ,
- Brochure & specs (8 pages)
Table of Contents
Advertisement
7. Disconnect the flexible flat cables from the connectors
(CN201, CN301, CN302) on the IF-110 board.
8. Remove the two screws, and remove the IF-110 board
from the camera assembly.
Camera assembly
Flexible flat
cables
CN201
CN301
CN302
B2 x 3
Installation
9. Reinstall the IF-110 board to the camera assembly in
the reverse order from steps 7 and 8.
10. Perform the BRC-300/300P camera block electrical
alignment. (Refer to Section 3-2.)
11. Reattach the shield chassis to the camera assembly,
and then fix it with the four screws.
n
Replace the tapes A with new ones as necessary.
12. Reassemble the unit in the reverse order from steps 1
to 5.
2-16
Flexible flat
cable
IF-110 board
2-2-7. IF-944 Board and VC-343 Board
Removing
1. Remove the side rear assembly and side front assem-
bly. (Refer to steps 1 to 3 in Section 1-3-1.)
2. Remove the camera cabinet upper assembly.
(Refer to steps 2 to 5 in Section 1-3-2.)
3. Remove the camera cabinet lower.
(Refer to steps 3 to 5 in Section 1-3-3.)
4. Remove the SE plate.
(Refer to steps 2 to 4 in Section 2-2-9.)
5. Remove the camera assembly.
(Refer to steps 5 to 13 in Section 2-1-1.)
6. Remove the shield chassis.
(Refer to step 6 in Section 2-2-6.)
7. Disconnect the flexible flat cables from the connectors
(CN051, CN052) on the VC-343 board.
8. Disconnect the connector on the CD-389 board
(flexible card board).
9. Remove the two screws.
Camera assembly
CD-389 board
Connector
CN051
PSW2 x 6
CN052
B2 x 3
VC-343 board
Flexible flat cable
BRC-300/300P
BRU-300/300P
Hide quick links:
Advertisement
Table of Contents
